50% Discount offer by Cisco for all Certifications ( CCNA, CCNP, CCIE ) Till 11th March 2016

Huge offer by Cisco for students – Now everyone can avail 50% Discount offer for all cisco exams CCNA, CCNP, CCIE

Hurry Up Friends!!!

If you want to get cisco certification or – you want to re-certify of your ( CCNA, CCNP, CCIE ) certifications now friends you all have a golden chance to get certificate so let shear News with your friends.

NOTE :- Please keep in your mind discount is only applicable Cisco Certifications .

Till ,

Date : 11th March 2016

How to define a network Get familiar with the Networking Terms ?

What Is a Network How to define a Network?

Collection of Devices and the systems these are connected with each other and able to communicate with each other is called a Network.

In the Networking Two Type Of Topologies.

Physical Topology means how the network looks like and how the whole cables and devises are connected with each other in a network is called Physical Topology.

Logical Topology means how all the data signals travel with the help of Physical Topology.

What is a Protocol?  These are rules that govern with authority how devises or systems are communicating and shear information within the network or across a network.

For Example:

• 1.       IP –Internet Protocol
• 2.       HTTP –Hyper Text Protocol
• 3.       SMTP –Simple Mail Transfer Protocol
• 4.       FTP- Fail Transfer Protocol

Hundreds of Protocol work together to facilitate end-to-end communication between networks.

How to Create a USB, Flash Drive into a “Bootable” Drive

How to Create a USB, Flash Drive into a “Bootable” Drive

In this article I will shear with you friends how to create bootable USB Flash drive with some single steps.

• 1.       The first step to make a bootable USB insert USB in to the system
• 2.       Second step open command prompt when you take a mouse on CMD and Right click on The CMD and Run as Administrator.
• 3.       Friends when you open the CMD Run as Administrator first command write into the CMS is “Diskpart” and press Enter.
• 4.        Next step in the new  command line that’s open the USB drive in numbers or drive number like “1” or letters like <A> now friends  type in the command prompt  “list disk” and press Enter .
• 5.       In this step we need to select a drive if you want to make Bootable drive type select disk <A>, or <1>.
• 6.       In the sixth step type “clean” in the command prompt this command will help you friends to remove all the data form your USB flash Drive.
• 7.        Now the next step we need to create Primary Partition of USB. Here type “Create Primary” “Partition” and then click enter.
• 8.       Here we select Partition which we want to make bootable, type “Select Partition 1” and click Enter.
• 9.       At this step to format the selected partition, we use command prompt write format fs=ntfs quick friends if you want fat32you can use same command for Fat 32 “format fs=fat32 quick”.
• 10.   Step ten we need to active our USB Flash Drive. Now Type “Active” and again same click enter.
• 11.   Finally we need to quit now so type in the command prompt type “Exit” and the once again click enter.

CCNA Basics: About CCNA basic information Page short vision ..

CCNA Basics: About CCNA basic information Page short vision ..

About CCNA basic information Page short vision ..

About CCNA basic information Page short vision ..

is a starter’s site for a person who wants to learn networking from scratch. The site is created in a very simple and easy to understand language.

This site is based on networking and explains the basic concepts of networking devices. It deals with some basic networking protocols and explains their working. Several networking devices are discussed emphasizing on routers and their architecture. The communication between devices is shown using CISCO’s Packet Tracer which can be downloaded from the internet. Using the packet tracer we have explained how to configure routers and use them to deliver messages. Similarly, several routing protocols are discussed here.

You can start learning following the categories on the right side of the this page.

CCNA 200-120 (Cisco Certified Network Associate) Course Outline First Five Lecture First #5 Lectures

CCNA 200-120 (Cisco CertifiedNetwork Associate) Course Outline First Five Lecture
First #5 Lectures 

CCNA (Router & Switch)

Article I will shear with you course outline of Cisco certified network associate you also known as CCNA (Router & switch). You start of network field or you are certified it will help you to fine out the topics which you want Study or Teach.

1	Lecture	Course Information, Orientation  Fundamental of Networking
2	Lecture	Physical Connectivity of Computer ·         Topology  ·         Introduction of Hub/Switch, Router
3	Lecture	IP addressing, ·         Classes, Multi-casting ·         DHCP Client/Server
4	Lecture	Router As DHCP Server ·         Reserve ARP , ·         Gratuitous ARP ·         DNS Client
5	Lecture	Communication & Services OSI Reference Model ·         Protocol , Encapsulation / Header Attachment ·         Applications Layer, Presentation Layer ,

  

  

Some basic commands .These are the basic level commands & commonly used during configuration.

Some basics commands .These are the basic level commands & commonly used during configuration.

1.No shutdown- (This Commands will show you the interface)

2.Reload-restart ­­­- (This Command use to restart the router)

3.Show version  -(This command will show you the Cisco ISO version , Up-time of the router ,it will show you how the router will start ,where the system loaded from , the interfaces the POST founded and register the configuration

4.Show history – (This Command will show you the history of commands)

5.Show clock – (This Command show you  Date & Time of the Router)

6.Show users – (This Command will show you the users are connected to with router)

7.Show debug – (This Command show you all of the debugging that is currently enabled on router)

8.No debug all – (This command will turns off all kind of debugging that is enabled on the router)

9.Show protocol – (This command will show you which protocols are configured on router)

10. Hostname – (This command will be used for the suggest the router name)

11.Clear counters – (This command will clear all the interface counters)

Author : Muneeb Rabbani